How Would You Do Garage Door Installation In Your Property?

Most of the manufacturers provide free garage door installation services so you do not need to pay anything extra for such services. But if you want to install your garage door opener then you can try it with your DIY skills. There are different types of garage door openers available in the market and these include chain, belt and automatic. Motor mounted over the track of the opener is the most common.

Apart from that, you can also find torsion spring openers which are lightweight. In the case of torsion free opener, you do not find any chain and it is a vibration free garage door opener. Apart from the garage door opener, you need to install some other accessories like, remote control systems, keyless entry pads and keypad switches. You can also install Wi-Fi enable garage door opener in your property and control your garage door by using your Smartphone.

Garage door installation guidelines

It is better to rely on the expert and trained professionals for garage door installation because they have some advanced tools and can easily install your door within a few hours. But if you want to install your garage door by your DIY tools then you need to follow the below instructions:

You need to follow the instructions prescribed by the manufacturer of the garage door and you will find these details in their manual for garage door installation. First, you need to attach the opener with the torque tube spring system. If you find it installed inside the torque tube, then you remove it and slip the drive motor onto it. With the aid of lag screws, on the wall above the garage, have the mounting bracket for the drive wall fixed.

• Then you need to reinstall the torque tube with the end bracket and cable drum. In this case, you can use ¼ inch lag screws and you need to tighten the mounting bracket with the drive motor. Make sure that you must install such lag screws on the beam located at the topmost part of the garage door.
• Now you need to disconnect the cable from the motor and thread it through the wall bracket. You must install these brackets at least 6ft above from the floor and you can put a label on the wall to identify this zone. In future, you can disconnect the device from this zone during an emergency.
• Fasten the garage door and remove the cable. To lift the door, you can use clamp locking pliers and you can use a socket wrench to rotate the winding bold head of the door. Then you need to tighten the track bolts and you must follow the manufacturer’s directions in this regard.
• Now you can add the stop bracket to the drive motor and set an emergency disconnect point. Then plug the female end of the power cord into the opener. If you find the cord is short in length, then use an approved cord extender.

Lastly, you can install the remote control with battery provided by the manufacturer and test the door once.

How would you choose the best garage door installation services?

Before you hire a garage door installation service, you must check their license and certifications. Apart from that, you can also check their customer reviews and BBB ratings online. In this regard, you can ask for some recommendations from your friends and relatives, and they can share some good contacts of professional garage door installation services.

Else, you can search such garage door installation services online and ask for the quotes from several companies. Then you can compare the prices and select an affordable one.